3D-Printed Lights mounting on bonnet

From Wurst-Wasser.net
Revision as of 00:10, 13 March 2019 by Heiko (talk | contribs) (→‎The Downloads)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

The Mission

After my son broke the lights on my bronco I needed a replacement. Working, if possible...

The Result

3D-Printed Lights mounting on bonnet 01.jpg 3D-Printed Lights mounting on bonnet 02.jpg 3D-Printed Lights mounting on bonnet 03.jpg 3D-Printed Lights mounting on bonnet 04.jpg 3D-Printed Lights mounting on bonnet 05.jpg 3D-Printed Lights mounting on bonnet 06.jpg 3D-Printed Lights mounting on bonnet 07.jpg 3D-Printed Lights mounting on bonnet 08.jpg

Instructions

  • 100% infill
  • PLA does fine
  • Support might be a good idea
  • Use some scrap lexan to cut lenses. You can also print the lenses, or at least use printed lenses as mask for cutting out the lexan lenses.

The Downloads

Links

Retrieved from "https://www.wurst-wasser.net//wiki/index.php?title=3D-Printed_Lights_mounting_on_bonnet&oldid=6202"